Integrated Slip-On Module LMTV-650

Specifications

• Water Tank: 650 gallons (US) capacity. 100% polypropylene construction with double-sided extrusion welds throughout.  Structural baffling system, internal 2” low level suction strainer, and removable lid with welded fill tower with integrated strainer. Water level sight-glass built into rear wall of tank (Figure 1). 1.5” expansion drain plug. Different tank capacities available upon request.
• Compartments: Two 28 cubic foot compartments, with 2 polypropylene doors each. Stainless steel 3 point, keyed, T-handle latch system, stainless-steel heavy-duty hinges, and 2 gas struts per door.
• Cargo Racks: Two 11.5 square foot over compartment areas. Other configurations available upon request.
• Foam Cell: Bolt-on design, 10 gallons (US), with internal ¾” foot valve/low level strainer and integral filler strainer vent cap (Figure 1, 2).
• Anchoring System: The integrated slip-on module attaches directly to the production M-1078 cargo bed using the 4 existing cargo bed pockets with our specially designed inserts (Figure 3) and 12-1/2” stainless steel bolts. Four 3/8” stainless steel lifting eyes are located on each corner of the tank to aid with installation.
• Weight: 900 pounds, not including pump or hose reel.

• Pump: WILDLAND PRODUCTS PRO 250 PUMP.  Speed increaser style, single-stage centrifugal pump. 250 PSI max/110 GPM. 2” suction and 1.5” discharge ports. Features aluminum alloy construction, bronze impeller, and carbon ceramic seals. Powered by a 14 HP high torque electric start Kohler Gasoline engine equipped with 4 stage air filtration system, integral 1.77 Gallon fuel tank, and backup recoil start (Figure 4).  (WILDLAND PRODUCTS PRO 300 PUMP as optional upgrade.)
• Discharge Manifold: Lightweight, modular, hard-anodized aluminum manifold with brass ball valves. Comes standard with 1.5” NH discharge, 1” return/tank fill line, and 1” hose reel valve (Figure 5). Other configurations available upon request.
• Suction: 3-way T port stainless steel 2” valve (Figure 5).
• Primer: Electric one-button system. Features an electric solenoid valve in conjunction with a Pentair electric diaphragm 3 GPM pump.
• Foam Proportioner: Scotty 4171 around the pump class A foam proportioner. Concentration range 0.15% to 3%. (FOAMATE foam proportioner optional upgrade.)
• Control Panel: Compact design, fabricated in polypropylene and attached to the pump module mounting pad. Contains the following: fluid filled pressure gauge, throttle control, choke, low pressure protection system, primer, lights, hose reel rewind, and foam proportioner (Figure 6). Control panel design may vary.
• Pump Module Mounting Pad: Removable, fabricated polypropylene. All pump system components are attached to this structure; bolts onto the slip-on pump platform using eight 3/8” stainless steel bolts.
• Couplings:  Hard anodized aluminum expanded ring rocker lug fire grade couplings used throughout (Figure 5).
• Hose Reel: REELCRAFT series 30000 with 175 feet of 3/4” semi-rigid hose. Electric rewind and roller guide standard. (1” hose reel also available.)
• Electrical Connections: 4 AWG with 50-amp circuit breaker from battery box to pump module. 10 AWG from pump module to hose reel.  Quick connectors in both circuits for quick removal of pump module (Figure 6).